JOHNTECH JET – JM Series Features:
  • Single Phase.
  • Self-Priming.
  • Pump body: Cast Iron.
  • Motor housing:
  • Brass Impeller.
  • Diffuser: Techno-polymer (P.P.O)
  • Energy efficient.
  • Automatic start / stop when fitted with the PS-01 controller (optional extra).
  • Run-dry protection when fitted with the PS-01 controller (optional extra).
  • Motor fitted with an overload switch.
  • Liquid temperature stability up to 60°C.
  • Total electric separation.
  • Mechanical seal: carbon / ceramic / stainless steel.
  • Simple servicing.
  • Fully factory tested.
  • Pre-wired with cable.
  • Insulation: Class B.
  • Protection: IP 44
  • Stainless Steel / Carbon steel shaft.
  • Cooling: External ventilation.
  • 12 month ex-factory warranty under normal operating conditions from date of purchase.
  • Motor speed approx. (rpm) 2850
  • Max. Liquid temperature (°C) 60
  • Max. Ambient temperature (°C) 40
  • Max. Suction line (meter) 9
JOHNTECH-JET-–-JM-Series_Products-Pool-Pumps-Header-image

JOHNTECH JET – JM Series
Self-priming pumps

The JOHNTECH JET – JM Series pump is self-priming, so the suction side of the pump can be installed below or above water level of the tank. The pump must be installed on a flat surface that would not flood in heavy rain. The pump is intended for clean water usage such as drinking water or non-potable water piping systems. This pump is designed for small to medium scale irrigation systems. The JOHNTECH JET – JM Series pump is perfect for use between the borehole pump-to-storage tank applications and from tank-to-house applications.
JOHNTEC-JET-Products-Image-section2
JOHNTECH-JET-–-JM-Series_Products-Pool-Pumps-Header-image
JET – JM Series Peripheral
pump
JET-–-JM-Series-Peripheral-pump-with-PS-01-_Products-Pool-Pumps-Header-image
JET – JM Series Peripheral pump with PS-01 controller (optional extra).
Performance Curve
JOHNTEC-JM-performance-curve
CODE DESCRIPTION VOLTAGE POWER OUTPUT P2
641.2407.453 JOHNTECH JET – JM100 1~230V 0.75kW
TECHNICAL DATA JOHNTECH JET – JM100
Inlet / outlet connection 1” / 1”
Power input P1 (kW) 1~230V 1.10
Power output P2 (kW) 1~230V 0.75
Power HP 1~230V 1.00
Rated current (A) 1~230V 5.20
Max. Flowrate (Q) 50 L/min
Total Manometric Head (H) in meter 50m
Max. Total Dynamic Head (bar) 5
CODE: 641.2407.453
DESCRIPTION: JOHNTECH JET – JM100
VOLTAGE: 1~230V
POWER OUTPUT P2: 0.75kW
TECHNICAL DATA: JOHNTECH JET – JM100
Inlet / outlet connection: 1” / 1”
Power input P1 (kW) 1~230V: 1.10
Power output P2 (kW) 1~230V: 0.75
Power HP 1~230V: 1.00
Rated current (A) 1~230V: 5.20
Max. Flowrate (Q): 50 L/min
Total Manometric Head (H) in meter: 50m
Max. Total Dynamic Head (bar): 5
Do you have any questions concerning this product?





    Select Your Province

    Product interested in: